Saturday, August 24, 2019

Measurement and Instrumentation LVDT sheet Lab Report

Measurement and Instrumentation LVDT sheet - Lab Report Example The device consists of a primary winding (P) and two secondary windings named S1 and S2. Both of them are wound on one cylindrical former, side by side, and they have equal number of turns. Their arrangement is such that they maintain symmetry with either side of the primary winding (P). A movable soft iron core is placed parallel to the axis of the cylindrical former. An arm is connected to the other end of the soft iron core and it moves according to the displacement produced. The LVDT is also used as a secondary transducer in various measurement systems. A primary transducer is used to convert the measurand into a displacement (Scholey et al.,1995). The LVDT is then used to measure that displacement. Examples are: The graph above shows the plot between the resulting voltage or voltage difference and displacement. The graph clearly shows that a linear function is obtained between the output voltage and core movement from the null position within a limited range of 4 millimeter. The results showed that there is linear relationship between displacement and voltage and this relationship continues till the maximum displacement of 40 mm, after that output voltage was decreased drastically towards negative side. The results revealed that there is very strong repeatability in LVTD as show in fig. (2). There is almost no difference in output voltage when the experiment was replicated second time. These results are supported by the findings of other researchers who reported the similar results. (Tariq et al., 2002 ; Wu et al., 2008 and Drumea et al., 2006). It is evident from the data that the instrument has high sensitivity, resolution and repeatability. Maintains a linear relationship between the voltage difference output and displacement from each position of the core for a displacement of up to 40 millimeter. Scholey, G. K., Frost, J. D., Lo Presti, D. C. F., & Jamiolkowski, M. (1995). A review of instrumentation

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.